Storage:
Store Castable under covered shed, on two pallets high Max
Surface Preparation:
The work surface shall be substantially free of dust, scale, oil water and loose foreign material and shall be cleaned by wire brush or sand blasting if necessary.
Use water proof plywood or steel formers; make the joints watertight using polythene tape.
Height of formers not to exceed 1000 mm.
Anchors:
Metallic and ceramic anchors suitable can be selected as per the detailed procedure available on request.
Equipment specification / Requirement.
High Intensity mechanical paddle type mixer capable of mixing 100-250 lgs/batch preferably cast make VAM type mixer or similar VAM / Paddle mixer(Typically 25-30 rpm)
Skin vibrator / Needle Vibrator, the rate of vibration should be at least 12000-1400VPM.Needle Dia. 25-60 mm depending upon thickness of lining. Graduated container should be used measure exact volume of water. Other tools and tackles used should be clean & contamination free.
Use clean ice cold water 18-24°C for making.